| |
|
 |
|
Minn Kota Endura Transom-Mount Trolling Motors
Minn Kota's popular Endura Transom-Mount Trolling Motors offer the type of rugged dependability and pure power that can't be beat. In addition to being an exceptional value, these work horses combine an indestructible composite shaft and a telescoping handle with a quiet, prop to form a package that says ''let's go fishing'' year after year. Indestructible Composite Shaft Pound for pound, stronger than steel. Flexes on impact. Will not break, kink or corrode and is guaranteed for life. Lever Lock Bracket Special composite materials resist flexing, warping and UV damage. Telescoping Handle Features an ergonomic, 6'' telescoping handle for greater comfort and steering convenience. Cool, Quiet Power Extra large windings and commutators are used to dissipate heat, resulting in cooler operation, extended battery power and longer motor life. A unique bearing system produces low rpms/high torque to cut down on fish-spooking noise Two-year warranty All Endura transom-mount trolling motors include Minn Kota's two-year warranty.
Sale price: $209.99
See it at Bass Pro Shops.
|
|
|
CMC PL-65 Electric Hydraulic Transom Jack Plate
With this powerful transom jack, one switch lets you easily set optimum motor height throughout all speeds. This self-contained and waterproof hydraulic unit, with permanent magnet 12V motor, has 5" of vertical travel. It features a high-strength extruded aluminum mounting bracket that sets your motor back 5-1/2" to let it run in cleaner water. This jack has many advantages like quicker starts, better prop clearance, increased speed, more versatility, and reduced fuel consumption. It mounts easily with included hardware--no drilling or modifying. For V-6 and smaller outboard marine engines.
Sale price: $799.99
See it at Bass Pro Shops.
|
|
|
|
|
CMC Manual Transom Jack Plate
This high strength 6061 extruded aluminum alloy mounting bracket lets you easily raise or lower your motor with a 1-1/8" wrench. Adjustment can be made at the top or the bottom. Allows 5" of slot adjustment at the motor mounting bracket and 1-1/2" slot adjustment at the transom bracket. Position it at the precise height for optimum motor performance, increased top-end speed, better prop clearance, lower engine RPM, reduced lower unit drag, and improved fuel consumption at cruising speeds. The bracket also sets your motor back 5-1/2" to let it run in cleaner water for peak efficiency. It mounts easily with included hardware - no drilling or modifying. For V-6 and smaller engines up to 300hp.
Sale price: $244.99
See it at Bass Pro Shops.
|
|
|
|
|
Lowrance /Eagle Transducers - Transom Mount
Model HS-WSBK - 192 kHz, 20? Skimmer? w/temp, 20' cable, fits units with older black connectors (except uni-plug products). Model HST-WSU - 200 kHz, 20? Skimmer? w/temp, 20' cable, fits Cuda, FishEasy 2 (black uni-plug connector units), FishMark 320, FishElite 320, X47 Model HST-WSBL - 200 kHz, 20? Skimmer? w/temp, 20' cable, fits units with blue connectors. Model HST-DFSBL - 20/200 kHz, 35? 50 kHz/12 DG 200 kHz Skimmer? w/temp, 20' cable, fits units with blue connectors (dual frequency only). Model HS-WS - 192 kHz, 20? Skimmer?, 20' cable, fits unit with 2-pin gray connectors. Model HS-WSDX - 200 kHz, 20? Skimmer? w/temp, 20' cable, fits units with new gray connectors. Model HS-50/200DX - 50/200 kHz, 35? 50 kHz/12?-200 kHz Skimmer? w/temp, 25' cable, fits X58DF, X88DF, X98DF, LMS-320DF, LCX series. Model HS-WSX - 200 kHz, 20? Skimmer?, 20' cable, fits FishEasy 2 (gray connector units). Model BV-WSX - 200 kHz, 150?, 3Beam Broadview?, 20' cable, fits TruFinder2.
Sale price: $139.99
See it at Bass Pro Shops.
|
|
|
Transom Trim Control
Provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface. It comes completely wired with installation instructions. Comes with 18'' pigtail wire.
Sale price: $23.99
See it at Bass Pro Shops.
|
|
|
Mini-Jacker for Clamp-on Outboards
This cast aluminum offset type jack plate is designed for clamp-on mount outboard motors up to 35 HP. Improves performance and handling of smaller or lighter boats. The Mini-Jacker also allows mounting of long shaft motors to shorter shaft transom boats. Mini-Jacker mounts to boat transom with bolts and then engine is simply clamped and/or bolted on. The Mini-Jacker stands off transom 4". The engine mounting surface is 11-1/2"Wx10"H and features a vertical offset of 3". The overall width of transom mounting flange is 17". Mounting hardware not included.
Sale price: $76.99
See it at Bass Pro Shops.
|
|
|
Transducer Brackets for Outboard Motors
A. Portable Transducer Bracket Quick removal from boat Simple depth adjustment provides low- and high-speed readings For boats with 15"-20" transom height and up to 2-1/8" thickness Aluminum construction Use with most transom mount transducers B. Transducer Bracket for Pontoon and Thick-Transom Boats Mounts to front or rear by turning clamp to accommodate boat deck Adjustment range 18"-26" Clamp fits pontoon with up to 3-3/4" platform skirt Aluminum construction
Sale price: $45.99
See it at Bass Pro Shops.
|
|
|
Humminbird Speed & Temperature Sensor
Speed Sensor The transom speed sensor is compatible with many Humminbird fishfinders and provides a digital reading of boat speed through water. It also activates the trip log features in capable units. 20' cable and hardware included. Sensor monitors speed from 2 to 75 mph. Model number: SW. Speed and Temperature Sensor The transom speed and temperature sensor combines two of the most popular accessory inputs into one compact transom mount unit. Sensor monitors temperature from 25 F to 99 F and speed from 2 to 75 mph. 20' cable and hardware included. Model number: TS W.
Sale price: $41.99
See it at Bass Pro Shops.
|
|
|
CMC Power Tilt and Trim
This is one tough unit with heavy-duty aluminum construction and waterproof 12V marine hydraulic system that's impervious to fresh and saltwater corrosion. Benefits include quicker out-of-the-hole starts, increased top-end speed, more prop clearance in shallow water and better gas mileage. Powerful and reliable motor provides 20? trim or 90? tilt. Available with or without dash-mount trim gauge. 6" setback increases boat stability and improves prop performance. The mount is pre-drilled for standard BIA bolt patterns (12-7/8" top holes on center, 9-7/8" bottom holes on center) and is rated for up to 130 HP outboards. Optional adapter kit for transom clamp motors and optional transom spacer for pontoon boats. Includes stainless steel mounting hardware, wire assembly and switch. 5-year structure warranty and 1-year hydraulic system warranty by manufacturer.
Sale price: $629.99
See it at Bass Pro Shops.
|
|
|
Humminbird High-Speed Transducers - XT-6-20
This Humminbird High-Speed Transducer is designed for trouble-free use in even the harshest marine environment. This dual beam transducer is designed for transom mount and offers 200 KHz/83 kHz and a 20' cable. Works with 200DX, NS25, HDR200, HDR600, Pro Flasher, Wide W, LCR W, 405SX, Legend 1000, Legend 2000, TFX IDD, TFX IDF, ZF40, Extreme 160, Pro Angler, Trak Pro 128DX, TFX160, TFX128, TFX100ID, Wide 100, LCR400, LCR400ID.
Sale price: $66.99
See it at Bass Pro Shops.
|
|
|
Safe-T Quick Steering System Replacement
The Safe-T Steering System is the OEM choice for safe, simple, reliable steering for boats up to 24'. To enhance the simplicity of this design, we now offer the Safe-T Quick Connect system. This system does not require tools to connect the cable to the helm, therefore reducing installation time up to 50%. Features: Replaces most other steering systems 3 turns lock to lock Included compact rotary helm occupies minimum space behind dashboard Stainless steel cable output ends Standard 3/4" taper shaft Exceeds BIA and ABYC standards Measuring for new installation: (Round off total to next full foot) 1. For installations through engine tilt tube: A+B+C+6" = Cable Length. Example: A=18"; B=96"; C=24". Total: 138"+6"= 144"= 12'. 2. For installations mounted to transom or splashwell: A+B+C-6" = Cable Length. Example: A=18"; B=96"; C=24". Total: 138"-6"= 132"= 11'. Wheel not included.
Sale price: $173.99
See it at Bass Pro Shops.
|
|
|
|
|
|
|
|
|
