|
Intake Manifold
"INTAKE MANIFOLD Unlike all-out racing manifolds, this street performance manifold increases horsepower while maintaining good bottom-end power Range: 2000 to 8000 RPM Uses all factory sensors The ultimate street performance manifold! Similar to the popular JDM Type R manifold but with additional built-in improvements! Plenum chamber has been lengthened to provide extra plenum volume when used with your supercharger, turbo or nitrous setupallows more flow for more horsepower. Nitrous bosses are located on underside of manifold. 65mm inlet can be bored larger if desired. Vacuum lines are relocated to back of engine for a clean under-hood look. Works with factory or aftermarket throttle body. For Acura and Honda with B16A Type """"B18C-5"""" DOHC V-TEC engine. Not for use with GSR head."
Sale price: $235.99
See it at JC Whitney.
|
|
|
R-134a Side Wheel Manifold with Hoses
(ROB40134A) R-134a Side Wheel Manifold with HosesFeatures: Solid Forged Brass Bar: Long-lasting and durable with proven face seal valves. New Universal Gauges: Easy to read dial faces show R-134a temperatures in degrees Fahrenheit, plus pressures in psi and kPa. Flexible Holster: Protects your manifold during use and storage. Sight Glass: Model 40135 shows movement of refrigerant through the manifold. All manifolds are covered by a 30-day Money Back Guarantee and a one year ""No Hassle Warranty"". Hoses: R-134a low permeation hoses with field service couplers on the high and low side hoses; yellow hose is 1/4"" FFL x 1/2"" Acme with Quick Seal Fitting. Includes: R-134a Manifold Gauge Set with three 72"" color-coded hoses and automotive field service couplers.
Sale price: $105.77
See it at Closeout.com.
|
|
|
|
|
Exhaust Manifold Spreader
(LIS13000) Exhaust Manifold SpreaderFeatures: For Reinstalling the Manifold on Small Block Chevrolets. A simple way to expand a warped manifold so all bolt holes are accurately aligned. Helps prevent cross-threading of manifold bolts. Works best when used in pairs. Or install before removing manifold to prevent misalignment.
Sale price: $9.86
See it at Closeout.com.
|
|
|
Two Way Manifold with Sight Glass for R134a
(ROB40135) Two Way Manifold with Sight Glass for R134aFeatures: Sight Glass: Confirms movement and condition of fluids passing through the manifold. Flexible Holster: Provides protection against the bumps and knocks of every day use. Pressure Temperature Chart: Stores in a slot on the back of the manifold; gives you multiple refrigerant capability. Face Seal Valves: Give a tight seal, less wear and improved flow. Includes: Sight Glass Manifold for automotive R-134a, three 72"" color-coded hoses with field service couplers
Sale price: $132.86
See it at Closeout.com.
|
|
|
Manifold Seal Kit
MANIFOLD SEAL KIT Improved design lasts longer and resists heat better For Volkswagen dual-port intake manifolds Split design. Installs easily. No need to remove manifold. Special synthetic material won't crack. Kit includes 2 boots and 2 clamps. For Volkswagen dual-port intake manifolds.
Sale price: $7.49
See it at JC Whitney.
|
|
|
Performer Eps Manifold
Performer EPS ManifoldDesigned for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's tuned for peak torque at 3500 rpm on a 350-cubic inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft/lbs of torque over the Edelbrock Performer manifold on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft/lbs.of torque for more performance where you need it most. Includes Oil FillTube (not installed) and matching push-in breather cap. Look for the Performer EPS to up the standards in dual-plane intake manifold design. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains.
Sale price: $226.99
See it at JC Whitney.
|
|
|
Exhaust Manifold Spreader
EXHAUST MANIFOLD SPREADER Exhaust Manifold Spreader is ideal for GM small block V-8 enginesUse to spread warped manifolds so bolt holes line up correctlyShould be used in pairs; place spreader between manifold flangesAdjust spreader width using open-end wrench
Sale price: $8.49
See it at JC Whitney.
|
|
|
Typhoon Intake Manifold
Typhoon Intake Manifold The Power+Plus Typhoon manifolds are a high rise dual plane intake. These manifolds typically perform best in the 1,500 to 6,500 rpm range and also have excellent throttle response. These manifolds have larger plenums and runners which match the higher lift cams and free flowing exhaust found on many high performance street machines.Not intended for emission equipped engines. Models for SB Ford and Chevy.
Sale price: $167.99 Save $108 or 39%
See it at JC Whitney.
|
|
|
Hurricane Intake Manifold
Hurricane Intake ManifoldThe Hurricane is one of our very most popular race manifolds. If you are looking for the utmost performance for the very least cost, this is your manifold. The base Hurricane is a terrific manifold for budget engines such as claimer motors.
Sale price: $195.99 Save $50 or 20%
See it at JC Whitney.
|
|
|
Hurricane Efi Conversion Intake Manifold
Hurricane EFI Conversion Intake ManifoldThe Hurricane is one of our very most popular race manifolds. If you are looking for the utmost performance for the very least cost, this is your manifold. The base Hurricane is a terrific manifold for budget engines such as claimer motors. Includes machined injector bosses.
Sale price: $249.99 Save $68 or 21%
See it at JC Whitney.
|
|
|
Side Wheel Manifold In Protective Holster with Enviro-Guard Hoses and Quick Seal Fittings
(ROB41640) Side Wheel Manifold In Protective Holster with Enviro-Guard Hoses and Quick Seal FittingsFeatures: The included side wheel manifold (Rob16000) is ready for almost every job, instead of carrying several manifolds with 1/4"" fittings. Gauges show R-22 and R-134a temperature scales. Flexible Holster - Provides protection against the bumps and knocks of everyday use Pressure Temperature Chart - Stores in a slot on the back; giving multiple refrigerant capability. Face Seal Valves - Give a tight seal, less wear and improved flow. Three 72"" Enviro-Guard hoses, Quick Seal fittings.
Sale price: $90.95
See it at Closeout.com.
|
|
|
Side Wheel Manifold with Standard Hoses and Standard Fittings
(ROB41620) Side Wheel Manifold with Standard Hoses and Standard FittingsFeatures: The included side wheel manifold (Rob16000) is ready for almost every job, instead of carrying several manifolds with 1/4"" fittings. Gauges show R-22 and R-134a temperature scales. Flexible Holster - Provides protection against the bumps and knocks of everyday use Pressure Temperature Chart - Stores in a slot on the back; giving multiple refrigerant capability. Face Seal Valves - Give a tight seal, less wear and improved flow. Three 72"" standard hoses, standard fittings.
Sale price: $60.31
See it at Closeout.com.
|
|
