| |
|
 |
|
Gravity-Feed Sandblaster
"GRAVITY-FEED SANDBLASTER Gravity forces sand particles into the hardened steel mixing chamber where they are forced through the ceramic nozzle at incredible speed and remarkable consistency Gravity feed is superior to conventional blasting methods for removing carbon, rust, old paint, etc. Fast and easysimply connect one airline and blast awayno tanks, no supply lines, no hassles Powerful! Multi-ribbed, swept-back trigger grip handle for effortless operation. Full adjustable control valve precisely controls flow of sand or other abrasives. Heavy-duty ABS plastic blaster has 26-oz. capacity. Weighs only 14 oz. empty. Operates on 60-125 psi. Minimum air compressor: 3 HP. 1/4"""" NPT air inlet. To save cleanup time, order Hot Spot (sold separately; item ZX499379). Replacement ceramic nozzle for sandblaster sold separately (item ZX499378)."
Sale price: $67.99
See it at JC Whitney.
|
|
|
2 PC. Gravity Feed Spray Gun Holder
(APGFH1000) 2 PC. Gravity Feed Spray Gun HolderFeatures: 2 pc gravity feed gun holder works great with all gravity feed spray guns Top strainer holder may be removed for additional clearance Strainer holder swivels away from cup
Sale price: $7.42
See it at Closeout.com.
|
|
|
|
|
Universal JP202 1 Bag of Demineralizer Filter Resin 450g, Removes Minerals from Tap Water Bottle Reservoir for All Brands of Gravity Feed Stream Irons
All gravity feed irons come with one bag of demineralizer filter resin, which should be poured in to the tap water container and hung above your iron before use. rnrnYou will need to purge the iron and water bottle of any resin residues before using the iron on any garment. Let the steam run continuously until all traces of any brown residue are gone, before steam ironing any fabric. rnrnWhen the demineralizer at the bottom of the water container turns darker, depending on time and use, replace with a new bag of deminerializer filter resin. rnrnIf you wait too long to replace, the iron and solonoid will clog up with minerals and be impossible to clean out. Repairs can cost as much as a new iron if the solonoid (no longer clicks) has to be replaced. If the steam chamber gets clogged up, the only way to clean out is with hydrochloric acid which we do not handle. rnrnIf you run out of demineralizer, use only distilled/demineralized water until you can get another bag of filter resin. rnrnAlways clear the lines and iron of remaining water after and before use. Turn off any valve at the water bottle if you are going to leave it off for a long time. rnrnRemember to make sure there are no air bubbles in the clear hose from your water bottle to solonoid nipple on the iron before use.rnrnCheaper and more convenient than buying distilled water. Fresh resin will look dark. A black/grey/navy color. When the color turns to a orange/yellow/rust, it's time to dispose of the old and on with the new. Length of time depends on usage.
Sale price: $19.99
See it at AllBrands.com.
|
|
|
Gravity Feed Hvlp Air Spray Gun
"GRAVITY FEED HVLP AIR SPRAY GUN Air consumption: 10 cfm Additional nozzle/air cap/needle set available separately Overhead cup for more efficient paint flow, better control and easier maneuvering. Removable air regulator controls air pressure, allows use of any viscosity paint and maintains the desired pressure no matter how powerful the compressor (no air surges). Built-in regulators adjust spray pattern (from flat to round) and material flow. Weighs less than 2-1/2 lbs. with air regulator. Non-bleeder, external-feed gun has die-cast aluminum body, trigger control, 1.4mm stainless steel nozzle and fluid tip. Non-drip 20-oz. plastic cup with lid mounts above gungravity feed allows for more precise control and assures a superb job even when using just a small amount of paint. Includes tool set and throttle strainer. Requires minimum 1-hp air compressor. Working pressure: 15- to 50-psi. Air inlet: 1/4""""NPS. Additional Nozzle/Air Cap/Needle Set: 2.0mm (sold separately, ZX811443)."
Sale price: $117.99
See it at JC Whitney.
|
|
|
|
|
|
|
Gravity-Feed Hand-Held Sandblaster
(UNI007) Gravity-Feed Hand-Held SandblasterFeatures: Fast and easy to use Lightweight and perfectly balanced High efficiency design with adjustable control valve to change amount of abrasive used Long-life ceramic Nozzle Neon red body with black pistol grip
Sale price: $43.15
See it at Closeout.com.
|
|
|
PLUS High Efficiency Gravity Feed Spray Gun
(DEVGFG670) PLUS High Efficiency Gravity Feed Spray GunFeatures: Comes with three fluid tips allowing you to spray low & high solids colors, clears & single stage automotive paints. High solids clear coat gun of choice - precision engineered #410 air cap lays out a smooth, high gloss finish. High speed coverage saves time - 20% larger spray pattern and 15% more fluid flow than traditional air spray or reduced pressure guns due to optimized air cap and tip design. Higher transfer efficiency - Greater than 65% transfer efficiency saves materials and improves visibility. Waterborne compatible - stainless steel fluid tip and needle, electroless nickel plated gun body inside and out. PLUS is gun washer safe. Quick clean-up and upside down spraying with included ""EZ-Liner"" disposable cup liners. Comes with 1.2mm, 1.3mm, 1.4mm fluid tips, 32oz. aluminum cup with lid, air adjusting valve with gauge. spray lube, fluid filter, gun hook, (9) EZ-Liner disposable cup liners. Air consumption: 9 cfm at 30 psi inlet pressure Air cap pressure does exceed 10 psi
Sale price: $409.64
See it at Closeout.com.
|
|
|
GTi Millenium HVLP Gravity Feed Spray Gun
(DEVGTI620G) GTi Millenium HVLP Gravity Feed Spray GunFeatures: Advanced technology for the professional painter Precision engineered #2000 gold air cap - meets exacting performance demands, producing extremely fine finish with all materials Even distribution of metallics for no mottling or striping - Excellent color matching capabilities 30 PSI inlet pressure delivers 10 psi at the air cap and 15.5 cfm Includes: 1.3mm, 1.4mm, and 1.5mm fluid tips, 32 oz. aluminum cup, Air adjusting valve with gauge, spray lube, fluid filter, gun hook
Sale price: $409.64
See it at Closeout.com.
|
|
|
High Efficiency Gravity Feed Plus Gun Without Cup
(DEV802170) High Efficiency Gravity Feed Plus Gun Without CupFeatures: Powerful atomization-twice the energy available in HVLP guns Powerful productivity-super fast fluid flow for high speed painting Powerful efficiency-equal to or better than HVLP transfer efficiency PLUS Gravity Gun Includes: - 1.2mm, 1.3mm, and 1.4mm fluid tips. - High output air adjusting valve with gauge - Spray lube, fluid filter, gun hook
Sale price: $324.28
See it at Closeout.com.
|
|
|
Finishline III Conventional Gravity Feed Spray Gun - 1.3mm
(DEVFLG651G13) Finishline III Conventional Gravity Feed Spray Gun - 1.3mmFeatures: Economically-priced and best value For Top Coats, General Purpose - use the 1.3 mm fluid Rugged, all-metal construction High grade, all aluminum gun body All-metal components, including: Replaceable, threaded, hard-coated aluminum baffle for economical servicing. No need to replace gun should gun body threads become damaged. Precision-engineered to produce uniform, well-atomized spray patterns Designed and engineered by the atomization experts at DeVilbiss. Air cap and all fluid tips produced with state-of-the-art precision manufacturing in the U.S.A. Repair parts and other fluid tip sizes available separately Best spray gun value! 611109 (FLG-651G-13) includes: 1.3 mm fluid True 1-liter aluminum cup Gun hook, spray lube, fluid filter Note: Does not include an adjustable air valve, order DEV FLG487 for the Finishline III Air Valve
Sale price: $131.72
See it at Closeout.com.
|
|
|
Finishline III HVLP Gravity Feed Spray Gun - 1.8mm
(DEVFLG643) Finishline III HVLP Gravity Feed Spray Gun - 1.8mmFeatures: For primers - 1.8mm fluid tip included. Rugged, all-metal construction High grade, all aluminum gun body All-metal components, including: Replaceable, threaded, hard-coated aluminum baffle for economical servicing. No need to replace gun should gun body threads become damaged. Precision-engineered to produce uniform, well-atomized spray patterns Designed and engineered by the atomization experts at DeVilbiss. Air cap and all fluid tips produced with state-of-the-art precision manufacturing in the U.S.A. Complies with HVLP regulations/Low air consumption - Only 23 psi inlet yields 10 psi at the air cap Repair parts and other fluid tip sizes available 1.3 mm, 1.5mm and 2.2 mm tips available separately 611106 (FLG-643) includes: 1.8 mm fluid (included) True 1-liter aluminum cup Gun hook, spray lube, fluid filter Note: Does not include an adjustable air valve, order DEV FLG487 for the Finishline III Air Valve Kit
Sale price: $161.44
See it at Closeout.com.
|
|
|
|
|
|
|
|
|