| |
|
 |
|
FACET SOLID-STATE ELECTRIC FUEL PUMPS
Replaces or bypasses mechanical fuel pump Prevents vapor lock—dependable fuel supply in the hottest weather or high altitude Fuel pump mount and block-off plate sold separately Compact and lightweight—less than 3" in any direction. Delivers Fuel At Up to 30 Gallons Per Hour. Pressure Rated at 2-4 psi. Weighs Only 18 oz. Not for fuel-injected engines. Compatible with all fuels and additives. Not for fuel-injected engines. Fuel pump mount allows fuel pump to be mounted in the stock location. Includes gasket and mounting. Fuel Pump Block-off Plate blocks off mounting area of old removed pump if mounting new pump in a remote location. Includes gasket.
Sale price: $54.99 Save $19 or 25%
See it at JC Whitney.
|
|
|
|
NEW FUEL PUMP 1980 1984 LINCOLN Mark III, IV, V , VIII
Current price/bid: $95.99 - See it at eBay!
Category: Car & Truck Parts > Air Intake & Fuel Delivery > Fuel Pumps
|
|
BRAND NEW FUEL PUMP 1988 CHEVROLET CORVETTE E3265
Current price/bid: $23.9 - See it at eBay!
Category: Car & Truck Parts > Air Intake & Fuel Delivery > Fuel Pumps
|
|
FUEL PUMP 80 84 LINCOLN Mark III, IV, V, VI, VII, VIII
Current price/bid: $95.99 - See it at eBay!
Category: Car & Truck Parts > Air Intake & Fuel Delivery > Fuel Pumps
|
|
BRAND NEW FUEL PUMP 85 - 87 Buick Skylark E3240
Current price/bid: $20.99 - See it at eBay!
Category: Car & Truck Parts > Air Intake & Fuel Delivery > Fuel Pumps
|
|
BRAND NEW FUEL PUMP 1985 - 1987 Buick Skylark E3240
Current price/bid: $19.45 - See it at eBay!
Category: Car & Truck Parts > Air Intake & Fuel Delivery > Fuel Pumps
|
|
BRAND NEW FUEL PUMP 1985 1986 1987 1988 FORD F350 E2025
Current price/bid: $98.99 - See it at eBay!
Category: Car & Truck Parts > Air Intake & Fuel Delivery > Fuel Pumps
|
|
|
|
CARTER® FUEL PUMP MODULE ASSEMBLY
Components of fuel pump module assembly: fuel- resistant plastic body, sender unit, spring, float, fuel pump and strainer The reservoir (part of the module) is located at the bottom of the fuel tank. When the fuel tank is cold, the module is in a contracted position. As the fuel heats up, the plastic tank will expand. The module will expand with the fuel tank, keeping the reservoir at the bottom of the tank at all times. The reservoir is continuously filled with fuel. This allows the vehicles to turn sharp corners or operate with little fuel. In fuel- injected vehicles, it is critical to keep pumping fuel to the injectors at all times. If the injectors go dry, it will create a vapor lock condition requiring the system to be pressurized.
Sale price: $131.99 Save $1,002 or 88%
See it at JC Whitney.
|
|
|
|
|
|
|
HOLLEY FUEL PUMPS AND SAFETY PRESSURE SHUT-OFF SWITCH
Pumps and switch to enhance fuel flow Red 97 GPH Fuel Pump. Features: tumble polished billet look, new lower housing casting for enhanced fuel flow and quieter operation, constant fuel flow with no pulsation, improved design for street or strip applications, externally accessible pressure relief valve (max 7 PSI), rotor and vane designs that are more tolerant of contaminated fuels, distinctive "RED" logo. Motor draws 2 amps current. Flows 97 GPH (free flow) and 71 GPH at 4 PSI. Regulator is not required. Can be serviced from either pump end or brush cap end. 7-1/2 amp fuse recommended. Weighs 2.88 lbs.. NOT compatible with alcohol or methanol fuels. Includes mounting bracket. Repair kits sold separately. Strongly recommended for use with safety shut-off switch (sold separately). Not designed or recommended for use with fuel injection systems. Blue 110 GPH Fuel Pump. Features; tumble polished billet look, new lower housing casting for enhanced fuel flow, constant fuel flow with no pulsation, improved design for street or strip applications, distinctive "BLUE" logo, externally accessible pressure relief valve (max 14 PSI), rotor and vane designs that are more tolerant of contaminated fuels. Motor draws 3 amps current. Can be serviced from either pump end or brush cap end. Flows 110 GPH (free flow) and 88 GPH at 9 PSI. 7-1/2 amp fuse recommended. NOT compatible with alcohol or methanol fuels. Includes mounting bracket. Repair kits sold separately. Includes fuel pressure regulator. Weighs 3 lbs.. Strongly recommended for use with safety shut-off switch (sold separately). Not designed or recommended for use with fuel injection systems. Safety Pressure Shut-off Switch. Works on any electric fuel pump. Takes less than 10 minutes to install.
Sale price: $25.99 Save $193 or 88%
See it at JC Whitney.
|
|
|
CARTER® MECHANICAL FUEL PUMPS
Carter mechanical fuel pumps are available for most domestic and imported passenger cars, trucks, marine and industrial engines. Many of the pumps were original equipment, others are built to meet or exceed OE requirements. Features and benefits include • Eliminates machining operations • Stamped steel Pumping Chamber (crimped to Aluminum Die Cast Body)Super Tach III • Eliminates diaphragm screws • Eliminates fuel leakage due to screws losing toque from diaphragm set • Conforms to shape of diaphragm loop to improve fuel vapor handling • Allows for better heat dissipation • Stamped Steel valve Towers • Less parts, eliminates the need for pulsator diaphragm and air chamber casting • Allows for better heat dissipation • Stamped Steel Channel Beam Lever • Improves pump life • Reduces weight • Reduces cost • Staked Interval Lever Pivot • Eliminates drilling, which can be a source of oil leaks • Improves pump life • Sealed Fuel Chamber • Improves safety by reducing chance of fuel spills during a crash • Complete unit • Breakaway crimp band simplifies assembly
Sale price: $21.99 Save $333 or 93%
See it at JC Whitney.
|
|
|
RETECH® REBUILT REPLACEMENT IN-TANK FUEL PUMP ASSEMBLY WITH SENDER
Replaces OE assembly Remanufactured to OE specifications OE cores are remanufactured to ensure perfect fit and performance All component parts are individually tested on state-of-the-art computerized equipment before assembly Save money when you replace your old, defective fuel pump or fuel tank. Don't sacrifice quality or reliability with this Rebuilt Replacement Fuel Pump Assembly with Sender. This fuel pump assembly is COMPLETE with everything you'll need. Includes fuel pump, sending unit, strainer, float (where original), gaskets, O-ring, terminals and connectors. For American and imported cars, pickups, SUVs and vans. For GM vehicles, we recommend replacing fuel pump wiring harness (sold separately). Limited 12-month/12,000-mile warranty.
Sale price: $53.99 Save $337 or 86%
See it at JC Whitney.
|
|
|
Fuel Pump Vacuum and Pressure Tester
(KD2521) Fuel Pump Vacuum and Pressure TesterFeatures: Test for fuel line pressure and vacuum leaks and check for leaky valves, timing, fuel pump vacuum and pressure and gas line leakage. Tester is equipped with an easy-to-read gauge with a 3"" hose and a vacuum hose adapter fitting. Gauge measures vacuum from 0 to 28"" Hg in 1"" increments (0 to 700mm Hg in 50mm increments). It also measures pressure from 0 to 15 psi in 1/2 psi increments (0 to 1 kg/cm2 in 0.1 kg/cm2 increments). Gauge diameter 2 11/16"".
Sale price: $17.44
See it at Closeout.com.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
