|
|
|
|
|
|
|
Front Tube Bumpers
FRONT TUBE BUMPERS Rugged Ridge Front Tube Bumpers are specifically designed for 2007-2008 Jeep Wrangler! Features a laser cut inset on the backside for a closer, less awkward looking fit Includes two fog lamp cut outs and welded filler plate for great looks Features welded end caps; all welds ground smooth Rugged Ridge Front Tube Bumpers are made to give your 2007-2008 Wrangler a compact, less awkward look over conventional bumpers! Laser cut inset lets bumper sit tighter to vehicle front, not hanging out like other bumpers. Super tough, great looking Rugged Ridge dependability. Choose from : Black Textured Front Tube Bumper With Hoop Stainless Steel Front Tube Bumper With Hoop Black Textured Front Tube Winch Mount Bumper With Hoop
Sale price: $390.99 Save $128 or 24%
See it at JC Whitney.
|
|
|
Full-Width Bumper Protectors
"FULL-WIDTH BUMPER PROTECTORSProvides extra protection across the entire width of your bumper Black PVC molding with smooth finish and rounded end caps for a factory-installed look Helps prevent paint scratches and bumper dings caused by minor impacts Flexible - conforms to curved bumpers. Installs easily with super-strong acrylic adhesive tape. No drilling required. Adheres securely to painted or chrome bumpers. Molding is 1-1/2""""W on the adhesive side with rounded corners at the top. Extends 1/2"""" from bumper surface. These bumper protectors are 13-ft. in length and can be easily trimmed to fit both front and rear bumpers. Includes 6 molded black end caps (2 front, 2 rear plus 2 extras for use when trimming around license plates or other obstructions). Caps are specially formed to blend right into the molding. Instructions included."
Sale price: $38.99
See it at JC Whitney.
|
|
|
Highrock 4X4 Bumper Box
"HIGHROCK 4x4 BUMPER BOX Mounts to Bestop Highrock 4x4 front or rear bumper or standard 2"""" receiver for extra storage space Indispensable storage unit for tools and winch recovery items Features an angled design for greater off road clearance Bolt on installation takes just minutes Locking bumper box mounts directly to the Highrock 4x4 front or rear bumper (rear mounting requires Bumper Box Bracket ZX348427 sold separately). May also be used as a step providing strong holding power up to 200-lbs. Made of 1/8"""" thick steel with side pop outs to store your Hi-Lift Jack (not included). Special black powder coat finish over E-Coat layer provides superior resistance to rust and corrosion. Includes instructions and mounting hardware. Note: Fits Highrock 4x4 front bumpers, but can also be mounted to a standard 2"""" receiver using bumper box bracket (ZX348427 sold separately) for use with oversized tire carriers."
Sale price: $122.99
See it at JC Whitney.
|
|
|
Xhd Modular Front Bumper System
XHD Modular Front Bumper SystemThe most avanced, toughest and most flexible bumper system ever created. .No other bumper can give your Jeep this many different looks and style. Now you can build the exact bumper of their choice?All components are constructed of heavy duty textured black powder coat painted steel with a tough E-coat under-coating. This tough finish will provide years of heavy duty use. Matching rear bumpers are available for a complete look.Short Base Front Bumper w/ D-RingsThe Short Base comes in two designs depending on your needs; Integrated Winch Mount for use with almost any aftermarket winch and Light Mount Base(07-09 Wrangler Only) with two light mounting locations. 07-09 Short Base attaches quickly to the frame with two enclosed D-Ring mounting brackets. 1976-2006 mounts to frame with included mounting brackets. Frame mount designs provide the toughest bumper attachment found anywhere while creating 2 overbuilt pull points. Each Short Base includes side filler p
Sale price: $62.99 Save $217 or 77%
See it at JC Whitney.
|
|
|
Xrc Front & Rear Bumpers
"XRC FRONT & REAR BUMPERS Front Bumper is engineered to provide maximum clearance for rock crawling, bolt-on mounting requires no modifications to vehicle Rear Bumper, with 3/16"""" solid plate center section, is designed to contour around an oversized tire to provide maximum clearance when opening and closing the tailgate. 2"""" receiver hitch is incorporated into the Rear Bumper and bolts directly to factory mounting pointsOther Features:Front Bumper: Solid one-piece Front Bumpers are manufactured from 3/16"""" cold rolled steel and robotically welded to exact specifications. All welds are ground down and smoothed out; then, a two-stage textured matte black powder coat is applied. Finish comes with a 5-year limited warranty. Unique built-in winch plate designcan accommodate up to a 10,000-lb. winch with the option of running an aluminum or roller fairlead.Rear Bumper: 3/16"""" solid plate center section. Pair of pressed tapered 2"""" diameter bearings. Reinforced double sided gusset. 1-1/4"""" Gr"
Sale price: $349.99 Save $225 or 39%
See it at JC Whitney.
|
|
|
Rear Bumper With Receiver Hitch
"REAR BUMPER WITH RECEIVER HITCH The Rugged Ridge Rear Tube Bumpers with hitch feature an exclusive, 17"""" rear opening that allows up to 31"""" tires to be mounted on the factory spare tire carrier. Includes a frame mounted 2"""" receiver hitch is available for lightweight towing(2000 lb towing weight, 200lb. tongue weight capacity). Most competitor's tube bumpers don't recommend towing, making a rear hitch virtually useless. Quality construction. Each Rugged Ridge Jeep Tube Bumper is constructed of only the finest materials available and finished like no other tubular product. All painted Rugged Ridge products are """"E-Coated"""" to ensure a no rust finish. This special process provides an electrostatic applied under coating that seals the raw steel. By having this exclusive undercoating, Rugged Ridge Bumpers can take small rock chips and still maintain their rust protection. All Rugged Ridge Rear Bumpers feature smooth ground welds for an unbelievable look and finish for you Jeep. This exclu"
Sale price: $219.99 Save $138 or 38%
See it at JC Whitney.
|
|
|
Rugged Ridge Jeep Front Stubby Bumper
"STUBBY TUBE BUMPER WITH BUILT IN WINCH MOUNT FOR 2007-2010 JEEP WRANGLER Ultimate off road winch bumperSpecial cut-outs for the JK Wrangler factory fog lamps Includes durable welded end caps Polished smooth welds Special inside pre–coat eliminates any chance of interior rusting. A Rugged Ridge Exclusive! This redesigned front tube bumper and redesigned ends make the ultimate off road winch bumper. This unique design has a built in winch mount and special cut–outs for the JK Wrangler factory fog lamps. Like the Rugged Ridge regular tube bumper, the front tubing is cut to allow the bumper to """"hug"""" the front end of the Jeep. Each bumper includes durable welded end caps and polished smooth welds for the ultimate in durability."
Sale price: $329.99
See it at JC Whitney.
|
|
|
Stick-On Bumper Protectors For All Vehicles
STICK-ON BUMPER PROTECTORS FOR ALL VEHICLESChoose from four different styles of bumper protectors (heavy-duty, contoured, mini and designer) to accessorize and protect your vehicleGreat for new cars with painted bumpers and vehicles without impact strips or bumper guards Impact-resistant PVC conforms to the bumper's contours
Sale price: $33.99
See it at JC Whitney.
|
|
|
"3"""" Diameter Tubular Bumper And Step Rails"
"OUR EXCLUSIVE 3"""" DIAMETER TUBULAR BUMPERS AND STEP RAILS 3"""" DIAMETER DOUBLE-TUBE FRONT BUMPER FOR JEEP Sensational looking protection from rocks and road debrisOne-piece welded design provides full-width coverageCenter over-rider and grille guard is 30"""" wide and extends 11"""" above bumper to protect grille areaCustomized for a perfect fit - easy bolt-on installationMade to last - choose polished stainless steel or black powder-coated steel 18-gauge 304 grade steel tubing is warranted by us not to rust for the usable life of the bumper. Tubes are spaced 1-1/4"""" apart. Easy bolt-on installation with no drilling required. All mounting hardware and end caps included.3"""" DIAMETER DOUBLE-TUBE REAR BUMPER FOR JEEPCustomize the rear of your JeepOne-piece welded design provides dependable full-width coverageTubes are spaced 1-1/4"""" apart Customized for a perfect fit - easy bolt-on installation Made to last - choose polished stainless steel or black powder-coated steel 18-gauge 304 grade steel"
Sale price: $409.99 Save $145 or 26%
See it at JC Whitney.
|
|
|
Rv And Trailer Rear Bumper Caps
"RV AND TRAILER REAR BUMPER CAPSThese 4""""x4"""" bumper caps can be attached quickly and easily onto your bumper with a special clip A cap saver helps eliminate the loss of bumper caps by attaching it to bumpers Caps have vented holes for air circulation and easy removalDurable lifetime polysynthetic constructionAvailable as a single cap, single cap with cap saver, or a pair of caps"
Sale price: $4.49 Save $2 or 30%
See it at JC Whitney.
|
|
